The BlendBoss makes its strongest case through its blending performance. Results depend heavily on liquid, fill level, and the order you add things.
Smoothies, leafy greens, and frozen fruit
Frozen fruit and spinach turn smooth once the cup has enough liquid. Too little liquid interrupts circulation and leaves a mixture that needs stopping and scraping, which is the most common way to get a bad result from this blender.
We would not promise a seedless drink. A berry-and-oat smoothie loses its large frozen lumps but can keep seed texture and slight oat grit. If you want a silky green drink, stick to soft fruit, leafy greens, and plenty of liquid.
Ice crushing and frozen drinks
The Ice Crush preset runs an automatic cycle, and it is the reason for this review's title. Exact cycle length varies across configurations, so we rely on the preset and the texture rather than a stopwatch figure.
Ice is where loading matters most. A full load of oversized cubes can leave chunks, and reducing the load improves crushing. Ice piled near the opening can also block the blade assembly from seating, so you may need to remove or reposition a few cubes before it screws on. Smaller cubes and a measured amount give the snowiest result.
Protein shakes and milkshakes
A chocolate protein shake with milk and ice, sipped through the lid and straw, came out creamy rather than gritty. Add powder in the recommended ingredient order. Out of order, it can stick to the side of the cup.
This is the BlendBoss at its best: a single tall shake, blended and drunk from the same cup.
Thick blends and practical limitations
A moist mixture of chickpeas, tahini, and oil can turn creamy without hand stirring, but this is a drink blender first. Add liquid every time.
The usable volume is the real ceiling. The tapered cup can feel smaller in practical portions than the nominal 26-ounce figure suggests, and the 24-ounce fill line and 6-ounce minimum liquid marking leave a fairly narrow window.